Specifically engineered with reduced parts ensuring maximum performance and unmatched reliability in variety of applications
Truly Non-lubricated Design
A non lubricated outside accessible air distribution system with no messy pre- packed grease
Energy saving
20% less air consumption over conventional pumps
Fully bolted design
Quick tear down & rebuild, Hence negligible downtime during operation
20% Fewer wearing parts
Low periodic maintenance is required
Self Priming
The pump design (incorporating internal check valves) allows for high suction lift even at dry start-up and with heavier fluids
Explosion Proof
As pumps are operated by compressed air, therefore, they are intrinsically safe
Submersible
If external components are compatible - these pumps can be submerged in the liquid by simply running the exhaust line above the liquid level
VARIANTS |
|||
| AODD/25/BAN/N | AODD/15/BPS/N | ||
| SIZE | 1" | 1/2" | |
| CASING | Aluminum | Polypropylene | |
| DIAPHRAGM | NBR | Santoprene | |
| FLOW RATE | Upto 140 LPM (37 GPM) | Upto 55 LPM (14.5 GPM) | |
| PUMP INLET/OUTLET (F) | 1" | 1/2" | |
| AIR INLET | 3/8" | 1/4" | |
| AIR INLET PRESSURE | 29-100PSI(2-7BAR) | 29-100PSI(2-7BAR) | |
| MAX. PARTICLE SIZE | 1/8" (3 mm) or less | 1/32" (1 mm) or less | |
| WETTED COMPONENTS | Aluminum & NBR | Polypropylene & Santoprene | |
| DISCHARGE VOLUME PER CYCLE | Upto 600 ml | Upto 190 ml | |
| DIMENSIONS | 0"×10"×12-3/8"(257×257×315mm) | 8-1/2" × 9-21/32" × 11-11/32" (216 × 245 × 288 mm) | |
| LIQUID TEMP. | 0-80°C | 0-60°C | |
| MAX. AIR CONSUMPTION | 900 LPM (31.8 CFM) | 700 LPM (24.7 CFM) | |
| NOISE LEVEL | 81 db | 81 db | |
| WEIGHT | 9.3 kg (20 lbs) | 2.58 kg (5.6 lbs) | |
| RECOMMENDED USE | Waste Oil, Diesel, Kerosene, Lubricants, Brake Fluid, Engine Oil & Gear Oil | Adblue, Antifreeze, Ethanol, Ammonium Hydroxide & Waste Water | |
