Specifically engineered with reduced parts ensuring maximum performance & reliability. These are used for transfer of clean & particulate laden fluids including waste oil in industrial, automotive, chemical processing, oil & gas and marine applications
A non lubricated outside accessible air distribution system with no messy pre- packed grease
20% less air consumption over conventional pumps
Quick tear down & rebuild, Hence negligible downtime during operation
Low periodic maintenance is required
The pump design (incorporating internal check valves) allows for high suction lift even at dry start-up and with heavier fluids
As pumps are operated by compressed air, therefore, they are intrinsically safe
If external components are compatible - these pumps can be submerged in the liquid by simply running the exhaust line above the liquid level
VARIANTS |
|||
| AODD/25/BAH/N | AODD/15/BAH/N | AODD/15/BPS/N | |
| SIZE | 1" | 1/2" | 1/2" |
| CASING | Aluminum | Aluminium | Polypropylene |
| DIAPHRAGM | Hytrel | Hytrel | Santoprene |
| FLOW RATE | Upto 140 LPM (37 GPM) | Upto 58 LPM (15.3 GPM) | Upto 55 LPM (14.5 GPM) |
| PUMP INLET/OUTLET (F) | 1" Opening | 1/2" Opening, 4 inlets & 4 outlets | 1/2" |
| AIR INLET | 3/8" | 1/4" | 1/4" |
| AIR INLET PRESSURE | 29 - 100 PSI (2 - 7 BAR) | 29 - 100 PSI (2 - 7 BAR) | 29 - 100 PSI (2 - 7 BAR) |
| MAX. PARTICLE SIZE | 1/8" (3 mm) or less | 1/32" (1 mm) or less | 1/32" (1 mm) or less |
| WETTED COMPONENTS | Aluminum & Hytrel | Aluminum & Hytrel | Polypropylene & Santoprene |
| DISCHARGE VOLUME PER CYCLE | Upto 600 ml | Upto 160 ml | Upto 190 ml |
| DIMENSIONS | 10 × 10 × 12-3/8" (257 × 257 × 315 mm) | 8-1/2 × 9-21/32 × 11-11/32" (216 × 245 × 288 mm) | 8.5 x 8.5 x 11.34" (216 x 216 x 288 mm) |
| LIQUID TEMP. | 0 - 80°C | 0 - 80°C | 0 - 60°C |
| MAX. AIR CONSUMPTION | 900 LPM (31.8 CFM) | 520 LPM (18.3 CFM) | 700 LPM (24.7 CFM) |
| NOISE LEVEL | 81 db | 81 db | 81 db |
| WEIGHT | 9.3 kg (20 lbs) | 5.4 kg (11.9 lbs) | 2.54 Kg (5.6 lbs) |
| RECOMMENDED USE | Diesel fuel, Kerosene, Lubricants, Gear oil, Engine oil, Waste oil, Brake fluid, Naphtha, Mold lubricants, Antifreeze & Waste water | iesel fuel, Kerosene, Lubricants, Gear oil, Engine oil, Waste oil, Brake fluid, Naphtha, Mold lubricants, Antifreeze & Waste water | Adblue, Antifreeze, Ethanol, Ammonium Hydroxide & Waste Water |
