x

AIR OPERATED TRANSFER PUMP                                

Product Brief

The New Air Operated Fluid Transfer Pump: Ideal for quick safe transfer of fluids in industrial and workshop applications, on farms & construction sites

Operated via compressed air supply the pump comes as a kit with:

  • Air Pressure Regulator: Factory set at 5 PSI (0.3 BAR) for controlled air supply into the fluid drum
  • In-built 1/4" spring loaded safety valve to prevent pressure build-up in the pump system
  • 2 Pc Suction Tube: Suitable for use on 50-205 litre (15-55 gallon) drums with 1-1/2" or 2" opening
  • 6' (1.85m) × Ø 1" (26mm) discharge hose with steel spout

Available in two versions

a. With Steel Suction Tube
b. With Stainless Steel Suction Tube

 

  STEEL SUCTION TUBE STAINLESS STEEL SUCTION TUBE
WETTED COMPONENTS Steel, Cast Iron, Brass & NBR* Stainless Steel, Cast Iron, Brass & NBR*
RECOMMENDED USE Diesel, Kerosene & Oils Water & Water Based Media, Corrosive media, Diesel, Kerosene & Oils
DO NOT USE WITH Gasoline, Lacquer, Thinners, etc. Gasoline, Lacquer, Thinners, etc.
*only for version with discharge hose
 

*measured at pump outlet tested using water


WARNING

Pump must be supplied with clean & dry compressed air

The standard pump configuration is also not suitable for use with flammable media such as Gasoline

For the pump to operate, drum must be sealed ensuring no air outlet to maintain pressure



FLUIDS


Diesel19.jpg Kerosene7.jpg Oil11.jpg Water3.jpg
   
PRINT
main-air-operated-transfer-pump.jpg

SPECIFICATIONS

MAX. AIR PRESSURE 5 PSI (0.3 BAR)
AIR INLET CONNECTION 1/4" (F)
BUNG SIZE 1-1/2" & 2"

RECENTLY VIEWED PRODUCTS