x

SPRING CALIPERS & DIVIDERS                                

esp Calibradores & divisores muelle    frCompas et diviseurs Á ressort   de Feder-Spitzzirkel und Spitzzirkel

Product Brief

Calipers are designed for transfer measurements or for comparing external and internal measurements.

Dividers are used for marking on steel or for transferring measurements from master templates.

Manufactured from high grade steel with a polished finish

Legs pivot on a roller and are tensioned by a bow spring.

Measuring adjustment is via an adjusting nut that allows fine settings.

Measuring capacity/ Size is the distance between the fulcrum and the end of the leg.

Available in two types:
a. With Solid Nut
b. With Quick Nut

The threads of the split quick adjusting nut engage the screw at the slightest pressure of the leg and when the pressure is withdrawn, the nut releases itself sliding freely over the screw. This feature helps save valuable time in opening & closing when a variety of measurements have to be taken consecutively


Quick Nut
"An Alternative to the solid adjusting nut, a split quick adjusting nut is also available which helps in making quick & positive adjustments. The threads of the nut firmly engage the screw at the slightest pressure of the leg. When the pressure is withdrawn, the nut releases itself sliding freely over the screw. Thisfeature helps save timein opening andclosingwhenavarietyofmeasurements have to be taken consecutively
 
 

   
PRINT

Ordering Information

CAT. NR. ORD. NR. CAT. NR. ORD. NR. SIZE
WITH SOLID NUT WITH QUICK NUT (INCH) (MM)
INSIDE CALIPERS
ID/3 01400 ID/Q/3 01430 3 75
  ID/4 01401 ID/Q/4 01431 4 100
  ID/6 01402 ID/Q/6 01432 6 150
  ID/8 01403 ID/Q/8 01433 8 200
ID/10 01404 ID/Q/10 01434 10 250
ID/12 01405 ID/Q/12 01435 12 300
ID/EC/14 01409 - - 14 350
ID/EC/16 01406 - - 16 400
ID/EC/18 01407 - - 18 450
ID/EC/24 01408 - - 24 600
OUTSIDE CALIPERS
OD/3 01410 OD/Q/3 01440 3 75
  OD/4 01411 OD/Q/4 01441 4 100
  OD/6 01412 OD/Q/6 01442 6 150
  OD/8 01413 OD/Q/8 01443 8 200
OD/10 01414 OD/Q/10 01444 10 250
OD/12 01415 OD/Q/12 01445 12 300
OD/EC/14 01819 - - 14 350
OD/EC/16 01816 - - 16 400
OD/EC/18 01817 - - 18 450
OD/EC/24 01818 - - 24 600
  Best Seller
CAT. NR. ORD. NR. CAT. NR. ORD. NR. SIZE
WITH SOLID NUT WITH QUICK NUT (INCH) (MM)
SPRING DIVIDERS
DD/3 01420 DD/Q/3 01450 3 75
  DD/4 01421 DD/Q/4 01451 4 100
  DD/6 01422 DD/Q/6 01452 6 150
  DD/8 01423 DD/Q/8 01453 8 200
DD/10 01424 DD/Q/10 01454 10 250
DD/12 01425 DD/Q/12 01455 12 300
DD/EC/14 01829 - - 14 350
DD/EC/16 01826 - - 16 400
DD/EC/18 01827 - - 18 450
OD/EC/24 01828 - - 24 600
Inside Caliper in use to measure the internal
diameter of a cylinder Outside Caliper being used to inspect the
external diameter of a machined component

RECENTLY VIEWED PRODUCTS