esp Botadores Conico frPoincon de Durchschläger
Carbon steel single piece construction with hexagonal shank
Accurately hardened and tempered for extended service life
Working ends are machine ground with the body in premium powder coated finish
Used for lining up holes in 2 or more pieces of metal and for drawing pins through various assemblies, these are also referred to as “Alignment Punches”.
| CAT NR. | ORD NR. | TIP DIAMETER (D) | STOCK SIZE | OVERALL LENGTH (L) | ||||
|---|---|---|---|---|---|---|---|---|
| (INCH) | (MM) | (INCH) | (MM) | (INCH) | (MM) | |||
| DFP/HD/3-32 | 25800 | 3/32 | 2.5 | 5/16 | 8 | 8 | 200 | |
| DFP/HD/1-8 | 25801 | 1/8 | 3 | 5/16 | 8 | 8 | 200 | |
| DFP/HD/5-32 | 25802 | 5/32 | 4 | 3/8 | 10 | 9 | 225 | |
| DFP/HD/5-32/SPL | 25822 | 5/32 | 4 | 1/2 | 13 | 10 | 250 | |
| DFP/HD/3-16 | 25803 | 3/16 | 5 | 1/2 | 13 | 10 | 250 | |
| DFP/HD/3-16/SPL | 25820 | 3/16 | 5 | 5/16 | 8 | 10 | 250 | |
| DFP/HD/7-32 | 25804 | 7/32 | 5.5 | 1/2 | 13 | 10 | 250 | |
| DFP/HD/7-32/SPL | 25823 | 7/32 | 5.5 | 3/4 | 19 | 17.3/4 | 450 | |
| DFP/HD/1-4 | 25805 | 1/4 | 6 | 5/8 | 16 | 12 | 300 | |
| DFP/HD/1-4/SPL | 25821 | 1/4 | 6 | 3/8 | 10 | 10 | 250 | |
| DFP/HD/5-16 | 25806 | 5/16 | 8 | 3/4 | 19 | 12 | 300 | |
| DFP/HD/3-8 | 25807 | 3/8 | 9.5 | 3/4 | 19 | 15 | 375 | |
| DFP/HD/3-8/SPL | 25824 | 3/8 | 9.5 | 5/8 | 16 | 10 | 250 | |
| DFP/HD/1-2 | 25808 | 1/2 | 12 | 7/8 | 19 | 10 | 450 | |
| SET | ||||||||
| Set of 7 Drift Punches packed in vinyl pouch | ||||||||
| DFP/HD/7/ST | 25809 | 1/8"(3mm) | 5/32"(4mm) | 3/16"(5mm) | 7/32"(5.5mm) | 1/4"(6mm) | 5/16"(8mm) | 3/8"(9.5mm) |
| Best Seller | Underlined sizes find use in construction for aligning scaffoldings |
Insert the punch into the hole,
pry or twist both into alignment.
Tapping gently with the long well
formed taper will ensure that the
holes are in perfect alignment.
