x

HAND TAPS - CARBON STEEL            

Product Brief

Taps are used for cutting internal threads in predetermined holes.These perform best in materials where the cutting action results in chips which break up readily and do not present problems of chip disposal. Taps are usually used in sets of 3 (taper,second and bottom).

Taper
Used to provide a quick & easy start, but this will not cut the thread down to the bottom of the hole.

Second
Used to increase the size of cut.

Bottom
Used for follow through right to the bottom to obtain full depth of thread. As opposed to straight threads such as BSW, UNC, UNF, Metric etc; taps with parallel threads are shorter in length and are used for parallel threading. These are used in sets of 2. All taps are right hand taps.



BRITISH STANDARD WHITWORTH (BSW) 55° - SET OF 3
CAT. NR. ORD. NR. NOMINAL SIZE TPI (THREAD PER INCH)
(INCH)
TAP/1-16 09400 1/16 60
TAP/3-32 09401 3/32 48
TAP/1-8 09402 1/8 40
TAP/5-32 09403 5/32 32
TAP/3-16 09404 3/16 24
TAP/7-32 09405 7/32 24
TAP/1-4 09406 1/4 20
TAP/9-32 09407 9/32 20
TAP/5-16 09408 5/16 18
TAP/3-8 09409 3/8 16
TAP/7-16 09410 7/16 14
TAP/1-2 09411 1/2 12
TAP/9-16 09412 9/16 12
TAP/5-8 09413 5/8 11
TAP/11-16 09414 11/16 11
TAP/3-4 09415 3/4 10
TAP/13-16 09416 13/16 10
TAP/7-8 09417 7/8 9
TAP/15-16 09418 15/16 9
TAP/0-1 09419 1 8
TAP/1-1-8 09420 1.1/8 7
TAP/1-1-4 09421 1.1/4 7
TAP/1-3-8 09422 1.3/8 6
TAP/1-1-2 09423 1.1/2 6
TAP/1-3-4 09424 1.3/4 5
TAP/0-2 09425 2 4.1/2
BRITISH STANDARD FINE (BSF) 55° - SET OF 3
CAT. NR. ORD. NR. NOMINAL SIZE TPI (THREAD PER INCH)
(INCH)
TAP/BSF/3-16 09800 3/16 32
TAP/BSF/7-32 09801 7/32 28
TAP/BSF/1-4 09802 1/4 26
TAP/BSF/9-32 09803 9/32 26
TAP/BSF/5-16 09804 5/16 22
TAP/BSF/3-8 09805 3/8 20
TAP/BSF/7-16 09806 7/16 18
TAP/BSF/1-2 09807 1/2 16
TAP/BSF/9-16 09808 9/16 16
TAP/BSF/5-8 09809 5/8 14
TAP/BSF/11-16 09810 11/16 14
TAP/BSF/3-4 09811 3/4 12
TAP/BSF/13-16 09812 13/16 12
TAP/BSF/7-8 09813 7/8 11
TAP/BSF/15-16 09814 15/16 11
TAP/BSF/0-1 09815 1 10
TAP/BSF/1-1-8 09816 1.1/8 9
TAP/BSF/1-1-4 09817 1.1/4 9
TAP/BSF/1-3-8 09818 1.3/8 8
TAP/BSF/1-1-2 09819 1.1/2 8
TAP/BSF/1-3-4 09820 1.3/4 7
TAP/BSF/0-2 09821 2 7
- - - -
- - - -
- - - -
- - - -
UNIFIED COARSE (UNC) 60° - SET OF 3
CAT. NR. ORD. NR. NOMINAL SIZE TPI (THREAD PER INCH)
TAP/UNC/1-4 09900 1/4 20
TAP/UNC/9-32 09909 9/32 20
TAP/UNC/5-16 09901 5/16 18
TAP/UNC/3-8 09902 3/8 16
TAP/UNC/7-16 09903 7/16 14
TAP/UNC/1-2 09904 1/2 13
TAP/UNC/9-16 09910 9/16 12
TAP/UNC/5-8 09905 5/8 11
TAP/UNC/11-16 09911 11/16 11
TAP/UNC/3-4 09906 3/4 10
TAP/UNC/13-16 09912 13/16 10
TAP/UNC/7-8 09907 7/8 9
TAP/UNC/15-16 09913 15/16 9
TAP/UNC/0-1 09908 1 8
TAP/UNC/1-1-8 09914 1.1/8 7
TAP/UNC/1-1-4 09915 1.1/4 7
TAP/UNC/1-3-8 09916 1.3/8 6
TAP/UNC/1-1-2 09917 1.1/2 6
TAP/UNC/1-3-4 09918 1.3/4 5
TAP/UNC/0-2 09919 2 4.1/2
UNIFIED FINE (UNF) 60° - SET OF 3
TAP/UNF/1-4 10100 1/4 28
TAP/UNF/5-16 10101 5/16 24
TAP/UNF/3-8 10102 3/8 24
TAP/UNF/7-16 10107 7/16 20
TAP/UNF/1-2 10103 1/2 20
TAP/UNF/9-32 10117 9/32
TAP/UNF/9-16 10108 9/16 18
TAP/UNF/5-8 10104 5/8 18
TAP/UNF/11-16 10109 11/16 18
TAP/UNF/3-4 10105 3/4 16
TAP/UNF/13-16 10110 13-16 16
TAP/UNF/7-8 10111 7-8 14
TAP/UNF/15-16 10112 15-16 14
TAP/UNF/0-1 10106 1 12
TAP/UNF/1-1-8 10113 1.1/8 12
TAP/UNF/1-1-4 10114 1.1/4 12
TAP/UNF/1-3-8 10115 1.3/8 12
TAP/UNF/1-1-2 10116 1.1/2 12
BRITISH STANDARD PARALLEL (BSP) 55° - SET OF 2
TAP/2/BSP/1-8 09500 1/8 28
TAP/2/BSP/1-4 09501 1/4 19
TAP/2/BSP/3-8 09502 3/8 19
TAP/2/BSP/1-2 09503 1/2 14
TAP/2/BSP/5-8 09504 5/8 14
TAP/2/BSP/3-4 09505 3/4 14
TAP/2/BSP/7-8 09507 7/8 14
TAP/2/BSP/0-1 09506 1 11
TAP/2/BSP/1-1-4 09508 1.1/4 11
TAP/2/BSP/1-1-2 09509 1.1/2 11
TAP/2/BSP/1-3-4 09511 1.3/4 11
TAP/2/BSP/0-2 09510 2 11
METRIC -SET OF 3
CAT. NR. ORD. NR. NOMINAL SIZE PITCH
TAP/2M 09602 2 0.40
TAP/3M 09603 3 0.50
TAP/4M 09604 4 0.70
TAP/5M 09605 5 0.80
TAP/6M 09606 6 1.00
TAP/7M 09607 7 1.00
TAP/8M/SPL 09660 8 1.00
TAP/8M 09608 8 1.25
TAP/9M/SPL 09661 9 1.00
TAP/9M 09609 9 1.25
TAP/10M/SPL1 09663 10 1.00
TAP/10M/SPL 09662 10 1.25
TAP/10M 09610 10 1.50
TAP/11M 09611 11 1.50
TAP/12M/SPL2 09666 12 1.00
TAP/12M/SPL 09664 12 1.25
TAP/12M/SPL1 09665 12 1.50
TAP/12M 09612 12 1.75
TAP/14M/SPL 09667 14 1.25
TAP/14M/SPL1 09668 14 1.50
TAP/14M 09614 14 2.00
TAP/16M/SPL 09669 16 1.50
TAP/16M 09616 16 2.00
TAP/18M/SPL 09670 18 1.50
TAP/18M/SPL1 09671 18 2.00
TAP/18M 09618 18 2.5
TAP/20M/SPL 09672 20 1.5
TAP/20M/SPL1 09673 20 2.00
TAP/20M 09620 20 2.50
TAP/22M/SPL1 09674 22 1.50
TAP/22M 09622 22 2.50
TAP/24M 09624 24 3.0
TAP/27M 09627 27 3.0
TAP/30M 09630 30 3.5
TAP/33M 09633 33 3.5
TAP/36M 09636 36 4.0
TAP/39M 09639 39 4.0
TAP/42M 09642 42 4.5
TAP/45M 09645 45 4.5
TAP/48M 09648 48 5.0
TAP/52M 09652 52 5.0
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -