x

DRIFT PUNCHES            

Product Brief

Carbon steel single piece construction with hexagonal shank

Accurately hardened and tempered for extended service life

Working ends are machine ground with the body in premium powder coated finish

Used for lining up holes in 2 or more pieces of metal and for drawing pins through various assemblies, these are also referred to as “Alignment Punches”.


WORKSHOP TOOLS FULL2 CATLAOGUE-140.jpg WORKSHOP TOOLS FULL CATLAOGUE-142.jpg
CAT NR. ORD NR. TIP DIAMETER (D)   STOCK SIZE   OVERALL LENGTH (L)    
    (INCH) (MM) (INCH) (MM) (INCH) (MM)  
DFP/HD/3-32 25800 3/32 2.5 5/16 8 8 200  
   DFP/HD/1-8 25801 1/8 3 5/16 8 8 200  
   DFP/HD/5-32 25802 5/32 4 3/8 10 9 225  
   DFP/HD/5-32/SPL 25822 5/32 4 1/2 13 10 250  
   DFP/HD/3-16 25803 3/16 5 1/2 13 10 250  
DFP/HD/3-16/SPL 25820 3/16 5 5/16 8 10 250  
DFP/HD/7-32 25804 7/32 5.5 1/2 13 10 250  
DFP/HD/7-32/SPL 25823 7/32 5.5 3/4 19 17.3/4 450  
   DFP/HD/1-4 25805 1/4 6 5/8 16 12 300  
DFP/HD/1-4/SPL 25821 1/4 6 3/8 10 10 250  
DFP/HD/5-16 25806 5/16 8 3/4 19 12 300  
DFP/HD/3-8 25807 3/8 9.5 3/4 19 15 375  
DFP/HD/3-8/SPL 25824 3/8 9.5 5/8 16 10 250  
DFP/HD/1-2 25808 1/2 12 7/8 19 10 450  
SET                
    Set of 7 Drift Punches packed in vinyl pouch            
DFP/HD/7/ST 25809 1/8"(3mm) 5/32"(4mm) 3/16"(5mm) 7/32"(5.5mm) 1/4"(6mm) 5/16"(8mm) 3/8"(9.5mm)
  Best Seller     Underlined sizes find use in construction for aligning scaffoldings